|
Post by alexweiihman on Feb 27, 2007 18:14:45 GMT -5
Hey guys ive got a k-line K4 and the cowcatcher is loose, the k-line engines have soldered catchers so i was wondering if anyone had ideas about using a glue or should i just solder it.
|
|
|
Post by lotus098 on Feb 27, 2007 22:07:49 GMT -5
You could probaly use an epoxy, if you put it in area where it wouldn't show.
|
|
|
Post by RR Redneck on Feb 28, 2007 10:25:03 GMT -5
Hell, CA it!
|
|
|
Post by alexweiihman on Feb 28, 2007 16:12:27 GMT -5
I m thinking abou using a pen solder on it
|
|
|
Post by TrainboySD40-2 on Feb 28, 2007 19:58:17 GMT -5
I'm down iwht that, CA is the god of glues. Just don't touch it!
|
|
|
Post by RR Redneck on Mar 1, 2007 10:59:34 GMT -5
Unless you like your fingers stuck together. I always use laytex gloves when I am workin with it.
|
|
|
Post by pcarrell on Mar 1, 2007 12:55:18 GMT -5
CA tends to chemically fog some parts. You have to be careful about what you use it on.
5 minute epoxy on the other hand, is just as strong, dries pretty much as fast, is sandable and paintable, never fogs parts, and dries clear. It's just a bit messier, thats all.
Soldering is good too, if you're handy at it.
Myself, I'd use the epoxy.
|
|